M10/22X55 Type HB Hex Head Hollo Bolt M10 Size 1 Hot Dip Galvanized

$26.99Per: EACH

Ready To Ship

Size
Material/finish


Hollo-Bolt expansion bolts require access to only one side of the Structural Hollow Section (SHS), and offer a faster alternative to welding or through-bolting, enabling contractors to reduce construction time and labour costs. Installation is quickly carried out by inserting into pre-drilled steelwork and tightening with a torque wrench. Also suitable for blind connections where access is available from one side only.

The larger M16 and M20 Hollo-Bolts are optimised for high strength structural connections and feature a unique High Clamping Force (HCF) mechanism for superior performance.

NEW Carbon steel, hexagonal head Hollo-Bolts in all sizes have been independently fire tested in both tension and shear in accordance with ISO 834 and are fire rated up to 120 minutes. For further details and load data please contact Lindapter. 

Technical Specification

              Collar   Safe Working Loads (5:1 Factor of Safety)
Product Code Bolt Ø Height Length Clamping Thickness Outer Ply Sleeve Outer Ø Ø   Tightening Torque Tensile Single Shear
  Z H B (max) W min t S D A/F      
    mm mm mm mm mm mm mm Nm kN kN
HB08-1 M8 10.5 45 3 - 22 - 13.75 22 19 23 4.0 5.0
HB08-2 M8 10.5 65 22 - 41 - 13.75 22 19 23 4.0 5.0
HB08-3 M8 10.5 85 41 - 60 - 13.75 22 19 23 4.0 5.0
HB10-1 M10 12.5 49 3 - 22 - 17.75 29 24 45 8.5 10.0
HB10-2 M10 12.5 64 22 - 41 - 17.75 29 24 45 8.5 10.0
HB10-3 M10 12.5 84 41 - 60 - 17.75 29 24 45 8.5 10.0
HB12-1 M12 14.5 53 3 - 25 - 19.75 32 30 80 10.5 15.0
HB12-2 M12 14.5 73 25 - 47 - 19.75 32 30 80 10.5 15.0
HB12-3 M12 14.5 93 47 - 69 - 19.75 32 30 80 10.5 15.0
High Clamping Force                      
HB16-1 M16 18 67 12 - 29 8 25.75 38 36 190 21.0 30.0
HB16-2 M16 18 92 29 - 50 8 25.75 38 36 190 21.0 30.0
HB16-3 M16 18 112 50 - 71 8 25.75 38 36 190 21.0 30.0
HB20-1 M20 22.5 80 12 - 34 8 32.75 51 46 300 35.0 40.0
HB20-2 M20 22.5 110 34 - 60 8 32.75 51 46 300 35.0 40.0
HB20-3 M20 22.5 140 60 - 86 8 32.75 51 46 300 35.0 40.0

  For Characteristic Resistances when designing a connection to Eurocode 3, please refer to DoC No.101

  For Characteristic Resistances when designing a connection to Eurocode 3, please refer to DoP No.001

• Hollo-Bolts can be used on a wide variety of steel hollow shape sections. Safe working loads shown are applicable to the Hollo-Bolt only in both tension and shear. Failure of the section could occur at a lower figure and its strength should be checked by a qualified Structural Engineer.

• Independently tested for dynamic load applications to EN 1993-1-9.

* Carbon steel, hexagonal head Hollo-Bolts in all sizes

SKU HB10GL-1
Brand Lindapter
Shipping Weight 0.1010kg
Size M10-1
Material/finish Hot Dip Galvanized

Be The First To Review This Product!

Help other Refast Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review


More From This Category