A20M Lindapter - Type A Recessed Clamp M20 Medium Tail Hot Dip Galvanized

$22.80Per: EACH

Ready To Ship

Size
Tail Length
Material/finish


The Type A girder clamp is used to achieve a fast steelwork fixing connection between two steel beams and is often used in a pair with Type B clamps. It has a recessed top to hold the bolt head captive while the nut and washer are tightened down using only one tool. The skirt on the underside of the clamp abuts the edge of the beam flange and prevents the clamp rotating during installation. Type A girder clamps can also be used on their own if one piece of the steelwork has been pre-drilled.

Technical Specification

    Safe Working Loads (FOS 5:1)   Dimensions
Product Code Bolt 8.8 Z Tensile / 1 Bolt Slip / 2 Bolts Tightening Torque* Y X Tail Length V T Width
              short medium long    
    kN kN Nm mm mm mm mm mm mm mm
A08 M8 1.0 - 6 16 8 - 4 - 4 20
A10 M10 1.5 - 20 20 11 4 5 7 5 26
A12 M12 5.8 0.9 69 26 13 4.5 6 9.5 6 29
A16 M16 8.5 1.7 147 30 16 5.5 8 11 8 36
A20 M20 14.7 3.0 285 36 19 7 10 12.5 10 46
A24 M24 19.7 4.5 491 48 29 9 12 16 13 55

* Torque figures based on bolts / setscrews in an unlubricated condition.

Suitable for UPN / IPN type tapered flanges.

SKU A20M
Brand Lindapter
Shipping Weight 0.1600kg
Size M20
Material/finish Hot Dip Galvanized
Tail Length Medium

Be The First To Review This Product!

Help other Refast Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review


More From This Category